Any surface where natural stone needs to be simulated. Printed concrete floorings are valid both for indoor as for outdoor uses, being this last use where it developes its better characteristics. It does not need any maintenance, being this one of the most important differences to other shorts of floorings. It is the ideal product to give your villa the final look you were looking for.
Swimming pools
This product is perfect for your needs when talking about a swimming pool, since it is a non-slip product.
Steps done with printed concrete look perfect. In streets and pavements you can obtain surprising combinations, adapted to road traffic. Creativity and space are joined when applied in parks, with a really different finish than the ones you are used to see. It is especially interesting to talk about the infinity of posibilitéis you can create by mixing molds and colours.
Imagine a design… we will make it real on your floor.
Valenciana
de impresos, S.LPlaza Torres Quevedo nave nº142 Pol. Ind. Sepes
46520 Puerto de Sagunto (Valencia)
Tel: 96 267 65 68 Fax: 96 268 30 24 móvil permanente: 659 96 18 00 e-mail,
Despite what it looks like, it is not natural stone, or concrete tiles previously produced. It is a job done “the old way” at the job site.
How is it done?
On the fresh concrete, previously leveled on its surface, we apply colour until all the surface is completely covered. Once the colour is ready, we apply another layer of product, using now a different substance.
Then, we print the surface with the desired mold. After, at least, 48 hours, we erase all rests of material, dust and dirt by high pressure washing the surface. Finally, to obtain a finish with top quality, we apply a layer of a product that closes the pores of the concrete and gives a shiny effect.
Printed concrete florings, are floorings done at the site, where, from a fresh concrete surface we obtain a superficial continuous covering, with high resistance, long life and a colourful look.
Its way of applying consists of pouring a superficial layer of hardening, coloured product, using formulas prepared at our laboratorios, never at the site.
Then, textures are printed by using our own molds, with different designs able to give the look of natural stones, wood or ceramics.
With a high range of nice printings and textures, printed concrete obtain attractive designs (slate, cobble, tiles…) able to replace convencional floorings with many advantages, both techninchal and mechanical.
MOLDS AND DECORATIVE POSSIBILITIES OF PRINTED CONCRETE
|
The main properties and advantages of printed concrete, are its long
life, high resistance to weather phenomena and its low maintenance costs.
These characteristics enable specialists in the world of construction,
architects and other professionals to achieve new effects, creating
urban landscapes, old or modern looking, urbanizations, promenades,
parks, streets, swimming pools, industrial areas and whatever your
imagination allows you to do with the highest technical specifications.
Properties
• High mechanichal specifications.
• Different texturas, shapes and colours.
• Weather proof.
• Possibility to mix different sorts of printings.
• Resistance to chemical agents, due to the finishing with superficial
curing resines, which close completely the surface of the concrete,
avoiding efflorescences, and allowing concrete to “breathe”.
Where can I use printed concrete?
Any surface where natural stone needs to be simulated. Printed concrete
floorings are valid both for indoor as for outdoor uses, being this last
use where it developes its better characteristics. It does not need any
maintenance, being this one of the most important differences to other
shorts of floorings. It is the ideal product to give your villa the
final look you were looking for. This product is perfect for your needs
when talking about a swimming pool, since it is a non-slip product.
Steps done with printed concrete look perfect. In streets and pavements
you can obtain surprising combinations, adapted to road traffic.
Creativity and space are joined when applied in parks, with a really
different finish than the ones you are used to see. It is especially
interesting to talk about the infinity of posibilitéis you can create by
mixing molds and colours. Imagine a design… we will make it real on your
floor.
What is printed concrete?
Despite what it looks like, it is not natural stone, or concrete tiles
previously produced. It is a job done “the old way” at the job site.
How is it done?
On the fresh concrete, previously leveled on its surface, we apply
colour until all the surface is completely covered. Once the colour is
ready, we apply another layer of product, using now a different
substance.
Then, we print the surface with the desired mold. After, at least, 48
hours, we erase all rests of material, dust and dirt by high pressure
washing the surface. Finally, to obtain a finish with top quality, we
apply a layer of a product that closes the pores of the concrete and
gives a shiny effect.
Sizes and colours of printed concrete
floorings:
Printed Concrete flooring achieve a huge range of uses, due to its
specifications for outdoor use. It gives you more options and better
quality than its more direct competitors (porcelain or red body tiles,
natural stone, slate..).Valenciana de impresos s.l , always tries to
give their customers a competitive price and a swift performance.
|
Printed Concrete
The company
Advantages
Appliying
www.pavimentosonline.com
PRINTED CONCRETE
• High mechanical resistance.
• Different sorts of textures, shapes and colours.
• Weather-proof.
• Possibility to mix different sorts of printings.
• Resistance to chemical agents, due to the finishing with superficial
curing resines, which close completely the surface of the concrete,
avoiding efflorescences, and allowing concrete to “breathe”.
THE COMPANY
Applicators of printed concrete floorings, premises all over Spain.
Terrazzo floorings.
ADVANTAGES of printed concrete
The main properties and advantages of printed concrete, are its long
life, high resistance to weather phenomena and its low maintenance
costs.
These characteristics enable specialists in the world of construction,
architects and other professionals to achieve new effects, creating
urban landscapes, old or modern looking, urbanizations, promenades,
parks, streets, swimming pools, industrial areas and whatever your
imagination allows you to do with the highest technical specifications.
Properties
• High mechanichal specifications.
• Different texturas, shapes and colours.
• Weather proof.
• Possibility to mix different sorts of printings.
Resistance to chemical agents, due to the finishing with superficial
curing resines, which close completely the surface of the concrete,
avoiding efflorescences, and allowing concrete to “breathe”.
Where can I use printed concrete?
Any surface where natural stone needs to be simulated. Printed concrete
floorings are valid both for indoor as for outdoor uses, being this last
use where it developes its better characteristics. It does not need any
maintenance, being this one of the most important differences to other
shorts of floorings. It is the ideal product to give your villa the
final look you were looking for. This product is perfect for your needs
when talking about a swimming pool, since it is a non-slip product.
Steps done with printed concrete look perfect. In streets and pavements
you can obtain surprising combinations, adapted to road traffic.
Creativity and space are joined when applied in parks, with a really
different finish than the ones you are used to see. It is especially
interesting to talk about the infinity of posibilitéis you can create by
mixing molds and colours. Imagine a design… we will make it real on your
floor.
What is printed concrete?
Despite what it looks like, it is not natural stone, or concrete tiles
previously produced. It is a job done “the old way” at the job site.
How is it done?
On the fresh concrete, previously leveled on its surface, we apply
colour until all the surface is completely covered. Once the colour is
ready, we apply another layer of product, using now a different
substance.
• Then, we print the surface with the desired mold. After, at least, 48
hours, we erase all rests of material, dust and dirt by high pressure
washing the surface. Finally, to obtain a finish with top quality, we
apply a layer of a product that closes the pores of the concrete and
gives a shiny effect.
Sizes, shapes and colours
Printed Concrete flooring achieve a huge range of uses, due to its
specifications for outdoor use. It gives you more options and better
quality than its more direct competitors (porcelain or red body tiles,
natural stone, slate..).Valenciana de impresos s.l , always tries to
give their customers a competitive price and a swift performance.
Printed concrete florings, are floorings done at the site, where, from a
fresh concrete surface we obtain a superficial continuous covering, with
high resistance, long life and a colourful look.
Its way of applying consists of pouring a superficial layer of
hardening, coloured product, using formulas prepared at our
laboratorios, never at the site.
Then, textures are printed by using our own molds, with different
designs able to give the look of natural stones, wood or ceramics.
With a high range of nice printings and textures, printed concrete
obtain attractive designs (slate, cobble, tiles…) able to replace
convencional floorings with many advantages, both techninchal and
mechanical.
MOLDS AND DECORATIVE POSSIBILITIES OF PRINTED CONCRETE
The main properties and advantages of printed concrete, are its long
life, high resistance to weather phenomena and its low maintenance
costs.
These characteristics enable specialists in the world of construction,
architects and other professionals to achieve new effects, creating
urban landscapes, old or modern looking, urbanizations, promenades,
parks, streets, swimming pools, industrial areas and whatever your
imagination allows you to do with the highest technical specifications.
Properties
• High mechanichal specifications.
• Different texturas, shapes and colours.
• Weather proof.
• Possibility to mix different sorts of printings.
• Resistance to chemical agents, due to the finishing with superficial
curing resines, which close completely the surface of the concrete,
avoiding efflorescences, and allowing concrete to “breathe”.
Where can I use printed concrete?
Any surface where natural stone needs to be simulated. Printed concrete
floorings are valid both for indoor as for outdoor uses, being this last
use where it developes its better characteristics. It does not need any
maintenance, being this one of the most important differences to other
shorts of floorings. It is the ideal product to give your villa the
final look you were looking for. This product is perfect for your needs
when talking about a swimming pool, since it is a non-slip product.
Steps done with printed concrete look perfect. In streets and pavements
you can obtain surprising combinations, adapted to road traffic.
Creativity and space are joined when applied in parks, with a really
different finish than the ones you are used to see. It is especially
interesting to talk about the infinity of posibilitéis you can create by
mixing molds and colours. Imagine a design… we will make it real on your
floor.
Valenciana de impresos, S.L
Plaza Torres Quevedo nave nº142 Pol. Ind. Sepes
46520 Puerto de Sagunto (Valencia)
Tel: 96 108 71 16, fax 96 11 88 221, móvil: 659 96 18 00 e-mail
MOLDS AND DECORATIVE POSSIBILITIES IN CONCRETE
The main properties and advantages of printed concrete, are its long
life, high resistance to weather phenomena and its low maintenance
costs.
These characteristics enable specialists in the world of construction,
architects and other professionals to achieve new effects, creating
urban landscapes, old or modern looking, urbanizations, promenades,
parks, streets, swimming pools, industrial areas and whatever your
imagination allows you to do with the highest technical specifications.
Properties
• High mechanichal specifications.
• Different texturas, shapes and colours.
• Weather proof.
• Possibility to mix different sorts of printings.
• Resistance to chemical agents, due to the finishing with superficial
curing resines, which close completely the surface of the concrete,
avoiding efflorescences, and allowing concrete to “breathe”.
Printed concrete, decorative possibilities
Aplicadores de pavimentos continuos, Pavimentos de hormigón impreso.
Obras, Madrid Valencia, Barcelona...
Pavimentaciones de hormigón y terrazo continuo
“Enlace”:
Franchise
Valenciana de Impresos offers integral service for creating or improving
existing applicator companies . We have our own molds, pigments, resines
and special tools for the implantation of the whole process.
We offer colours with exclusive formulas and a huge range of molds for
any need.
Furthermore, we have a team for training practicly new applicators, who
will finis their training totally capable of doing jobs all alone.
As per request by our franchise-holders, we send someone to the job site
to start their most important jobs.
Quite opposite to what other companies in this branch are doing,
Valenciana de Impresos do not receive any amount of money as franchise
rights.
If you are interested to get in touch with us, click on these links:
Nacional: info@valencianadeimpresos.com
Export: export@valencianadeimpresos.com
Printed concrete, gepresste beton, pattern concrete, coloured concrete,
concrete, spain, croatia, romania, hrvatska, bosnia, herzegovina,
serbia, serbsk, bulgaria, moldova, ungarn, hungary, macedonia, makedonia,
albania, kosovo, malta, italia, italy, zagreb, split, zadar, rijeka, pul